Rethink Robotics Announces Major Distribution Partnerships in Germany
World-Class Automation Providers Freise Automation and HAHN Robotics to Deliver Sawyer Robot to German Manufacturers
New Product - P-Rob 2 Second Generation of the Collaborative Robot
P-Rob 2 is an all-in-one robotic solution combining robot arm, sensor technologies and software including an embedded PC as control unit. So all that needs to be done is plug-in and run.
Getting Started with Collaborative Robots - Part 4 - Assess Your Potential Applications
Documenting the actual process will allow you to evaluate if the process can be automated. This will also give you a starting point on cell performance and improvement opportunities.
Getting Started with Collaborative Robots - Part 3 - Get the team on board with robots
In this section, well discuss how to present the idea of automating your production with your workforce, and how to help diminish fears of working with robots.
Getting Started with Collaborative Robots - Part 2 - How to Identify Potential Processes for Automation
At this point, we need to discuss the strengths and limitations of process automation with collaborative robots.
IREX - Meet the Japanese robots that do what humans can't
By Sam Byford for The Verge: Nearly half the jobs in Japan could be performed by robots in a decade or two, according to a recent study by Nomura Research Institute. If that's the case, then the International Robot Exhibition — IREX for short — is going to be the best place possible to get a glimpse of Japan's future.
Held in Tokyo once every two years since 1973, IREX is the biggest robot show in the world, and it features everything from cute communication bots to immensely powerful industrial machinery. Companies like Fanuc, which makes robot factory equipment used by Apple and Tesla but generally stays out of the spotlight, take center stage at IREX to demonstrate how effortlessly their articulated arms can pick up entire cars.
It's a show where online video companies' dancing idol robots rub shoulders with government-sponsored androids designed to save lives in natural disasters. As you might imagine, it's quite the place to walk around. Cont'd...
Getting Started with Collaborative Robots? Part 1 - What can collaborative robots do?
This is the first in a series of articles about Collaborative Robots
Think You Know Industrial Robots? Think Again
Jim Lawton for Forbes: Peter Drucker said “Culture eats strategy for breakfast” and in my experience there’s no industry where that wisdom holds more true than manufacturing. I’m not a hardened cynic, just a pragmatist, having spent the majority of my career bringing technology that disrupts the status quo – from inventory optimization and managing risk in the supply base to collaborative robots. Manufacturers are among the most skeptical buyers and for good reason – what they do is hard, complex and things are done the way they are done because it’s been proven to work. There are times though when the opportunity to transform the business is so compelling that – as Drucker said – executives need to spend whatever time is necessary to tear down the cultural barriers that are getting in the way of the strategy that capitalizes on the moment.
In the category of robotics and industrial automation, now is one of those times. It’s been more than 50 years since Unimate went to work at a GM plant unloading heavy parts and welding them onto automobile frames. Manufacturing has changed a lot and today is on an evolutionary path toward the 4th industrial revolution. Unfortunately, while executives may be ready to move quickly toward the factories of the future for first mover advantage, many automation engineers remain entrenched in 20th century thinking about robots — when they were highly customized solutions, designed to perform one task over and over again, with a price tag to match. Cont'd...
MIP Robotics Launches Its First Model of New Generation Industrial Robot â€"MIP Juniorâ€,
MIP robotics is a startup founded in 2015 and based on research conducted for many years. The company aims to provide accessible, industrial robots, especially for SMIs (small and medium industries). In other words, like 3D printing in recent years, MIP wants to democratize industrial robotics.
The robots can be used to automate repetitive, arduous or dangerous tasks; indeed it is possible to set the standard gripper arms: suction cup, hook, screwdriver, blade etc. Application examples are numerous: storing goods in cartons, checking the tightening torque, making the automated cutting, removing non-compliant products etc. MIP allows its customers to increase their productivity (and hence margins) in order to improve the quality or reduce the hardship. The investment can be made profitable in only 6 month.
The "Junior " is a robot called "SCARA" (that is to say a horizontal arm) operating on a range of 600mm and fixed on a vertical axis in a standard 400mm high. These dimensions can be adjusted on demand. Its speed reaches up to 250mm/s with an accuracy of 0.5mm and can move up to 5kg. Junior is also characterized by its ease of use: for instance you can teach the robot the movements to be carried out by manually moving the robotic arm. Finally, the robot stops in case of impact, enabling collaborative applications if all safety conditions are met. While prices often start around €20,000 on the market, Junior is available from €8000. Full Press Release:
Amazon's robotics group asked the FCC to test special wireless equipment
Jillian D'Onfro for Business Insider: Amazon is ramping up its robotics efforts and testing new technology that could make it safer to operate the fleet of robots toiling in its warehouses, according to recent FCC filings.
The FCC gave Amazon Robotics an expedited experimental license to test a "proximity sensing system" that the company hopes to deploy in fulfillment centers outside the U.S.
Amazon Robotics "seeks to evaluate radiolocation technology to be used in the operation of robotics in fulfillment centers outside the United States," the company said in the filing, the first such FCC filing by Amazon Robotics.
While Amazon stresses that the technology is strictly for internal use, and not something it intends to sell to "end users," the filing underscores the company's increasing investment and innovation in robotics, which has the potential to transform a broad swath of industrial and consumer markets. Cont'd...
Collaborative Robot Applications
Here are some of the best applications that can be done by a collaborative robot (in my own opinion).
Rob Scharff's Soft Robotics 3D-printed hand responds to human grip
Dutch Design Week 2015: Delft University of Technology graduate Rob Scharff has created a soft robotic limb that can shake hands with people.
The hand was created as part of Scharff's Soft Robotics research project – which focuses on the ways robots can be integrated with more tactile materials, and so improve robot-human interactions. Cont'd...
Google robotics to become a separate entity under Alphabet?
By tech2 News Staff: Earlier this year, Google had released an interesting video of Spot, a 160-pound dog robot navigating an office and then heading outside on its own. It is a smaller version of the Big Dog that first popped its head when Google acquired Boston Company. As the new changes come into effect, Boston Company is now Alphabet-owned and not a part of Google.
It will continue to build robots, and falls under Google X Projects (for now), a subsidiary of Alphabet. The other subsidiaries include Google, Nest Labs, Google X, Calico, Google Ventures, Google Capital and Google Life Sciences.
A new report says that the “company will create a separate division for robotics within the renamed umbrella entity Alphabet”, citing a person related to the matter. Google has acquired roughly eight companies related to robotics including military grade robotics company Boston Dynamics. It will likely allow Boston Dynamics to operate with some independence. Cont'd...
Technology gap gives foreign firms the edge in China robot wars
BY GERRY SHIH for Reuters: In a cavernous showroom on the outskirts of this port city in northeastern China, softly whirring lathes and svelte robot arms represent Dalian Machine Tools Group's (DMTG) vision of an automated future for Chinese manufacturing.
On closer inspection, however, most of the machines' control panels bear the logos of Japan's FANUC Corp or the German conglomerate Siemens.
The imported control systems in DMTG's products – used in the assembly of everything from smartphones to cement trucks – are symbolic of the technology gap between Chinese and foreign industrial automation firms, just one of several challenges facing China's ambition to nurture a national robotics industry.
Chinese robotics firms are also grappling with a weakening economy and slumping automotive sector, and industry insiders already predict a market bubble just three years after the central government issued policies to spur robotics development.
"Last year everybody thought they could produce a robot," said Alan Lee, director of Asia sales and business development at Boston-based Rethink Robotics. "When you have market saturation you'll have filtering and M&A. These guys will be the first layer to suffer."
It is a storyline familiar from other new industries such as solar panels: Beijing's policies and subsides trigger a wave of low-margin, low-cost contenders to rush into the market, where, with no meaningful technology of their own, they struggle to compete on price alone. Cont'd...
OMRON to Acquire U.S. Based Adept Technology
OMRON plans to acquire 100% of the outstanding shares of Adept common stock through an all cash tender offer followed by a second-step merger. OMRON will offer Adept investors $13.00 per share of Adept common stock, which represents a 63% premium over the closing price for Adept's common stock on September 15, 2015. This values Adept at approximately $200 million. OMRON will fund the tender offer through cash on hand.
Commenting on the acquisition, Yutaka Miyanaga, OMRON Industrial Automation Business Company President, said, "We are delighted Adept Technology, a world leader in robotics, has agreed to join OMRON. This acquisition is part of our strategy to enhance our automation technology and position us for long term growth. Robotics will elevate our offering of advanced automation."
Rob Cain, President and Chief Executive Officer of Adept, added, "We are excited about the opportunity to join OMRON, a global leader in automation. Together, our products will offer new innovative solutions to customers all around the globe."
Full Press Release:
Records 76 to 90 of 106
First | Previous | Next | Last
Featured Product
igus® - Free heavy-duty plastic bearings sample box
The iglide® heavy-duty sample box provides a selection of five unique iglide bearings, each suitable for use in heavy-duty equipment due to their self-lubricating, dirt-resistant properties. Each bearing material boasts unique benefits and is best suited for different application conditions, though each can withstand surface pressures of at least 11,603 psi at 68°F.
