Drone Light Painting - The Christmas Edit
From Ascending Technologies' blog:
The moves of the LED drone were shot while taking a long exposure photograph of every scene. Up to 10 minutes exposure time were needed. Additionally the flights have been filmed with an A7S Mark ii. In post processing the stills from the original drone flights were visualized via VFX and combined with further video footage.
The Drone Light Painting flights have been performed at airspeeds of 2 m/s with the patented V-Form Octocopter AscTec Falcon 8. Santa Claus throwing the presents into the chimneys and the snowflakes in the starting sequence of course are animated GIFs, yet based on flown paintings. Probably it was possible to do any drone light painting you like... (more)
'Darwin' the thinking robot teaches itself how to walk, just like a child
Andre Mitchell for ChristianToday: Just like a real human toddler, a robot is learning how to take baby steps inside a laboratory at the University of California Berkeley.
The state-of-the-art robot mimics the behaviour of a child so realistically that it also falls as it attempts to take its first steps.
What is even more impressive is that the robot, nicknamed "Darwin," is actually teaching itself how to walk, much like a little child.
The robot's developers, Pieter Abbeel and his team at UC Berkeley's Robot Learning Lab, explained that Darwin is not like other robots that are programmed to do only a set of things.
This robot has a neural network designed to mimic the human brain, through which it undergoes the process called "reinforcement learning."
"Imagine learning a new skill, like how to ride a bike. You're going to fall a lot, but then, after some practice, you figure it out," one of Darwin's developers, computer scientist John Schulman, explained in an article on NBC News. Cont'd...
There's a five-story vending machine dispensing used cars in Nashville
From Mashable:
That's right; online used car retailer Carvana has officially unveiled its first vending machine completely stocked with cars. Standing at five stories tall, the coin-operated (yes, really) glass tower vending machine can house as many as 20 used cars at a time. The facility also includes a welcome center and three customer delivery bays to which the cars are dispensed... (full story)
Toyota Invests $1 Billion in AI and Robots, Will Open R&D Lab in Silicon Valley
By Erico Guizzo and Evan Ackerman for IEEE Spectrum: Today in Tokyo, Toyota announced that it is investing US $1 billion over the next five years to establish a new R&D arm headquartered in Silicon Valley and focused on artificial intelligence and robotics. The Toyota Research Institute (TRI) plans to hire hundreds of engineers to staff a main facility in Palo Alto, Calif., near Stanford University, and a second facility located near MIT in Cambridge, Mass.
Former DARPA program manager Dr. Gill Pratt, an executive technical advisor at Toyota, was named CEO of TRI, which will begin operations in January. Toyota president Akio Toyoda said in a press conference that the company pursues innovation and new technologies “to make life better for our customers and society as a whole,” adding that he wanted to “work with Gill not just because he’s an amazing researcher and engineer, but because I believe his goals and motivations are the same as ours.” Cont'd...
Skype founders invent self-driving robot that can deliver groceries for £1
By Sophie Curtis, video by Robert Midgley: You've heard of Amazon's plan to deliver packages using drones; now a new company called Starship is promising to disrupt local delivery with the launch of a self-driving robot that can deliver groceries to customers' doors in under 30 minutes for less than £1.
The Starship robot has been developed by Skype co-founders Ahti Heinla and Janus Friis. It drives on pavements at an average speed of 4mph, and uses proprietary mapping and navigation technology to avoid crashing into obstacles, (check out the video we made). Cont'd...
Leeds could become the first 'self-repairing city' with a fleet of robotic civil servants
By Chloe Olewitz for Digital Trends: Most people don’t know a whole lot about the city of Leeds other than its distinct regional accent, but believe it or not, local Leeds University is actually known for being a pioneering research leader in the field of robotics. The university’s School of Civil Engineering has put together a key research team that is currently developing a fleet of civil service robots and drones that would effectively turn Leeds into a self-repairing city.
The robotics research project is funded with £4.2M ($6.5M) of national funds, focusing on autonomous machines that would fix infrastructure issues across the city of Leeds, and perhaps, eventually, beyond. Leeds’ robot fleet will focus on robotic fixes for citywide issues like burst or damaged utility pipes, broken or nonfunctional street lights, and road fractures that disturb drivers on their way to anywhere.
Three main branches of the project cover the functions of the Leeds robots: Perch and Repair; Perceive and Patch; and Fire and Forget. The Perch and Repair segment covers research into robotic drones that can land, or “perch” like birds atop tall structures like street lamps or building-mounted civil structures. The Perceive and Patch team leads research into drones that can survey popular roads or even particularly dangerous ones in order to identify and repair potholes where they exist, and in the future, even prevent them before they occur. Cont'd...
Driverless Taxi Experiment to Start in Japan
By JUN HONGO for The Wall Street Journal: Japan’s cabinet office, Kanagawa prefecture and Robot Taxi Inc. on Thursday said they will start experimenting with unmanned taxi service beginning in 2016. The service will be offered for approximately 50 people in Kanagawa prefecture, just south of Tokyo, with the auto-driving car carrying them from their homes to local grocery stores.
According to the project organizers, the cabs will drive a distance of about three kilometers (two miles), and part of the course will be on major avenues in the city. Crew members will be aboard the car during the experiment in case there is a need to avoid accidents.
Robot Taxi Inc., a joint venture between mobile Internet company DeNA Co. and vehicle technology developer ZMP Inc., is aiming to commercialize its driverless transportation service by 2020. The company says it will seek to offer unmanned cabs to users including travelers from overseas and locals in areas where buses and trains are not available. Cont'd...
euRathlon 2015 Challenge
Sixth day of euRathlon 2015 - euRathlon 2015 Grand Challenge - Part 2
25 September 2015, Piombino, Italy.
View euRathlon 2015 Grand Challenge - Part 1. Day Five
View euRathlon 2015 Challenge: Two-domain Scenarios. Day Four.
View euRathlon 2015 Challenge: Two Domain Trials - Day Three
View euRathlon 2015 Challenge: Single Domain Trials - Day Two
View euRathlon 2015 Challenge: Single-domain trials - Day One
WowWee brings expensive university bots to store shelves
By Corinne Iozzio for Scientific American: Hong Kong–based WowWee's success stems from bringing university research projects to life that might otherwise languish in the prototype stage. A licensing agreement with the Flow Control and Coordinated Robotics Labs at the University of California, San Diego, for example, provides WowWee with access to patents and the labs with a healthy cash infusion. The collaboration has already netted a series of toy robots that balance like Segways. More recently, the avionics lab at Concordia University in Montreal began working with the company to perfect flight algorithms for a four-rotor drone. Next, chief technology officer Davin Sufer says he has his eye on the Georgia Institute of Technology and its work with swarming behaviors, which would allow a group of robots to function in tandem.
In the case of Switchbot, WowWee adapted a locomotion system developed in part by former U.C. San Diego student Nick Morozovsky. The robot moves on tank-tread legs either horizontally to navigate uneven terrain or on end to stand and scoot fully upright. Morozovsky built his prototype with off-the-shelf parts, including a set of $50 motors. The motors were a compromise; each one had the size and torque he wanted but not the speed. Over the past few years he has worked with WowWee to customize a motor with the exact parameters needed and to cut the final cost of the part down to single digits.
That back and forth yields low-cost, mass-producible parts, which means university-level robotics could become available to everyday people. “One of the reasons I went into mechanical engineering was so I could create real things that have a direct impact,” Morozovsky says. “I didn't expect that to necessarily happen in the process of grad school.” Cont'd...
5 Robotics Stocks to Watch
Chad Fraser for The Street: Soon, robots could be doing much more than just vacuuming your house or assembling your next car-they could also invade your investment portfolio. If you're looking for the industry's fastest growth, you'll want to pay particular attention to what's happening on the consumer/office side, where sales are set to grow at a 17% compound annual rate between 2014 and 2019, according to a May report from Business Insider -- seven times quicker than the industrial-robot market. In addition, a number of radical new applications for robotics are emerging in the medical and defense markets, as outlined in this presentation from Investing Daily.
Even though the automation trend is clearly set, there still aren't many pure ways for investors to play it. But that doesn't mean there are no intriguing options out there. Here are five robot makers to keep on your radar screen:
Soft Robotics Project Exo-Biote 3D Prints Living Movement
BY HANNAH ROSE MENDOZA for 3DPrint.com: Soft robotics is a relatively new field of research that aims to create flexible robots that are more easily adaptable to human interaction. Often, the forms of these creations and the mechanics of their movement are inspired by a close study of nature in an effort to ‘go organic’ with machines. 3D printing with flexible filament is one way in which this integration of robot and movement is taking on a flexible aspect.
For this particular installation, titled Exo-biote, the National Institute for Research in Computer and Control and the Department of Science and Visual Culture at the Imaginarium worked together, with support from Neuflize Bank, to create a robot organism that embodied the formal typologies and demonstrated the possibilities for movements in soft robots. After all, some of nature’s most amazing machines have nearly entirely soft bodies – think of the octopus, for example, able to lift, carry, walk, swim, shape change, camouflage itself, and fit through a tube no bigger than a quarter! Cont'd...
Toyota hires robotics expert for AI push
Richard Waters for FT.com: Toyota has hired the top robotics expert from the US defence department’s research arm and promised $50m in extra funding for artificial intelligence research, as it steps up the race between the world’s biggest carmakers to pioneer new forms of computer-assisted driving.
However, the Japanese carmaker maintained on Friday that completely driverless cars were still years away, and that AI and robotics would have a more complex effect on the relationship between humans and their vehicles than Google’s experiments with “robot cars” suggest.
Gill Pratt, who stepped down recently from the Defense Advanced Research Projects Agency (Darpa), will move to Silicon Valley to head Toyota’s robotics efforts, the company said. Darpa played a key role in stimulating interest in driverless cars with a competition in 2005 — the leader of the winning entry, Sebastian Thrun, who was then a professor at Stanford University, went on to found Google’s driverless car programme. Cont'd...
Robotics Enter Hybrid Instruction
By Dian Schaffhauser for Campus Technology: A doctoral program at Michigan State University has begun experimenting with the use of robots to pull on-campus and off-campus students closer together in class. The Educational Psychology and Educational Technology (EPET) doctoral program focuses on the study of human learning and development and diverse technologies supporting learning and teaching. During a spring course in 2015 all but one student participated by being present in the form of an Apple iPad affixed to a swivel robot that was stationary; one student was on a robot that could move around the classroom.
As Christine Greenhow, the faculty member who led the seminar course, explained, the experiment was intended to expand beyond traditional Web presence of online students. "When you are using videoconferencing, it's very common to see all these different faces on the screen if you're here in the classroom and not really know where to look. It creates this distance between the speaker who's online and the speakers in the class," she said in a video about the project. "What if we could put online students in the classroom in a robot? How would their presence change?" Cont'd...
Why being able to 3-D print glass objects is such a big deal
By Dominic Basulto for the Washington Post: Researchers at MIT have just unveiled the ability to 3-D-print beautiful glass objects. While humanity has been forming, blowing and molding glass objects for more than 4,500 years, this is the first time that a 3-D printer has been used to process glass from a molten state to an annealed product.
Obviously, there are some purely aesthetic applications here, as in the potential for epic blown glass art. Think museum-worthy glass objects worthy of Dale Chihuly. In fact, the MIT team — a collaborative team of researchers that includes the MIT Media Lab’s Mediated Matter group, the MIT Glass Lab and MIT’s Mechanical Engineering Department — plan to display a few of their beautiful objects at an upcoming exhibition at the Cooper Hewitt, Smithsonian Design Museum in 2016.
But the applications go beyond just beautiful new designs that might be created via 3-D printers one day. As the MIT research team points out in a forthcoming paper for the journal 3-D Printing and Additive Manufacturing, “As designers learn to utilize this new freedom in glass manufacturing it is expected that a whole range of novel applications will be discovered.” That’s the real future potential of glass 3-D printing — the ability to create objects and applications that do not exist today. Cont'd...
Here comes the drone backlash
Mike Elgan for Computer World: Consumer drone technology is barely taking off, and already a harsh public backlash is growing.
Your typical garden variety consumer drone is lightweight, battery operated, has four propellers and is controlled by a smartphone. Most have cameras and beam back live video, which can be recorded for posterity. Some have high-quality HD cameras on them, and from that high vantage point can take stunning photos and videos.
Drones are fun. They're exciting. They're accessible. But increasingly, they're becoming unacceptable.
I'm sensing a growing backlash, a kind of social media pitchfork mob against drones and drone fans. It's only a matter of time, and not much time, before it will be politically incorrect to express any kind of enthusiasm for drones in polite company. I fear that many are about to embark on an "everybody knows drones are bad" mentality that will suppress the nascent industry and spoil this innovative and exhilarating technology.
Here's what's driving the coming backlash: Cont'd...
Records 571 to 585 of 629
First | Previous | Next | Last
Featured Product
igus® - Free heavy-duty plastic bearings sample box
The iglide® heavy-duty sample box provides a selection of five unique iglide bearings, each suitable for use in heavy-duty equipment due to their self-lubricating, dirt-resistant properties. Each bearing material boasts unique benefits and is best suited for different application conditions, though each can withstand surface pressures of at least 11,603 psi at 68°F.
